How do you reduce high pH in pebble tec pools?

1. Test your pool water. Use a pool test kit to measure the pH level of your pool water. The pH level should be between 7.2 and 7.8. If the pH is higher than 7.8, it is considered to be high.

2. Add acid to your pool water. Muriatic acid or Sodium bisulfate are commonly used to lower pH levels in pools. Follow the manufacturer's instructions for adding acid to your pool water.

3. Circulate the pool water. Run your pool pump for at least 24 hours after adding acid to your pool water. This will help to circulate the acid throughout the pool and lower the pH level.

4. Re-test your pool water. After 24 hours, test the pH level of your pool water again. If the pH level is still high, repeat steps 2 and 3.

5. Adjust the alkalinity level. High alkalinity can cause the pH level of your pool water to rise. If the alkalinity level of your pool water is high, you may need to add an acid to lower the alkalinity level.

6. Use a pH stabilizer. A pH stabilizer can help to keep the pH level of your pool water stable. Add a pH stabilizer to your pool water according to the manufacturer's instructions.

High pH can damage pool surfaces, pool equipment, and cause skin and eye irritation. It's important to keep your pool water at the correct pH level to prevent these problems.