How can you raise pH level from 6.2 to 7.4 in your 24000 gallon pool?

To raise the pH level of a 24000 gallon pool from 6.2 to 7.4, you can use pH increaser or soda ash. Here's a step-by-step guide on how to do it:

Materials Needed:

- pH increaser or soda ash

- Pool water testing kit

- Bucket

- Spoon or measuring cup

- Safety goggles and gloves

Instructions:

1. Test the Water: Use a pool water testing kit to check the current pH level of your pool. Ensure that it is indeed 6.2.

2. Calculate the Amount of pH Increaser: Determine how much pH increaser you need. Each pound of pH increaser typically raises the pH level of 10,000 gallons of water by about 0.2. For your 24000 gallon pool, you'll need:

- (7.4 - 6.2) / 0.2 = 6 pounds of pH increaser

3. Prepare the pH Increaser: Put on safety goggles and gloves. Place the required amount of pH increaser in a bucket and gradually add pool water to dissolve it completely. Stir the mixture until the pH increaser is completely dissolved.

4. Add the Solution: Slowly pour the prepared pH increaser solution around the edges of your pool while the pump is running. This ensures proper mixing and distribution throughout the pool.

5. Wait and Recheck: Allow the pH increaser to circulate and mix with the pool water. Wait for at least 30 minutes before testing the water again.

6. Repeat if Necessary: If the pH level is still below 7.4, you may need to repeat steps 3-5 by adding additional pH increaser. Remember to retest the water each time until you reach the desired pH level.

Tips:

- Always handle pool chemicals with care and follow the safety instructions on the product label.

- Consider diluting the pH increaser in a larger volume of water before adding it to the pool. This helps prevent localized concentration and potential damage to pool surfaces or equipment.

- If the pH level rises too high (above 7.8), you can use pH decreaser or muriatic acid to lower it.

Note: The specific amount of pH increaser required may vary based on the type of pool, water composition, and environmental factors. It's recommended to consult with a pool professional or follow the instructions provided by the manufacturer of the pH increaser you are using.