How do you rebar swimming pool?

* Rebar ( steel reinforcing bars)

* Wire ties

* Concrete mix

* Trowel

* Level

* Safety glasses

* Gloves

Instructions:

1. Remove the old concrete from the pool deck and walls.

2. Inspect the rebar for rust and damage. Replace any rusted or damaged rebar.

3. Cut the rebar to the desired length.

4. Tie the rebar together using wire ties.

5. Place the rebar in the pool deck and walls.

6. Make sure that the rebar is evenly spaced and level.

7. Pour the concrete mix into the pool deck and walls.

8. Use the trowel to smooth the concrete mix.

9. Let the concrete mix dry for at least 24 hours.

10. Once the concrete mix has dried, you can finish the pool deck and walls as desired.

Here are some tips for rebarring a swimming pool:

* Use a rebar calculator to determine the amount of rebar you need.

* When tying the rebar together, use a square knot.

* Make sure that the rebar is completely covered in concrete mix.

* Let the concrete mix dry completely before finishing the pool deck and walls.