How do you make water in a pool clearer?

1. Keep the pool clean. This means removing leaves, dirt, and other debris from the pool regularly. It also means brushing the pool walls and bottom to remove algae and other build-up.

2. Circulate the pool water regularly. This helps to distribute chemicals evenly throughout the pool and prevent the water from becoming stagnant. Most pool pumps should be run for 10-12 hours per day.

3. Use a pool cover when the pool is not in use. This helps to keep dirt and debris out of the pool. It also prevents the sun from shining directly on the pool water, which can help to reduce the growth of algae.

4. Use a pool vacuum to clean the pool thoroughly. This should be done once or twice a week, or more often if necessary.

5. Balance the pool chemicals. The pH level of the pool water should be between 7.2 and 7.6. The chlorine level should be between 1 and 3 ppm. The calcium hardness should be between 200 and 400 ppm.

6. Use a clarifier. A clarifier is a chemical that can help to remove small particles of dirt and debris from the pool water.

7. Run a flocculant before vacuuming. Flocculant helps to clump the dirt and debris in the pool water, so it can be easier to vacuum up.

8. Backwash the pool filter regularly. This will remove dirt and debris from the filter, so that it can function properly.

9. Have the pool water tested regularly. This will help you to identify any problems with the water quality and take steps to correct them.