How do you completely empty an inground pool?

1. Safety Precautions:

- Ensure that you have the proper safety equipment, including gloves and goggles.

- Be cautious if you have a sump pump or other electrical equipment near the pool.

2. Turn off the Pool Pump:

- Go to the pool's equipment area and turn off the power supply to the pool pump.

3. Check for Drains:

- Look for a designated pool drain or sump pump that is specifically designed for draining the pool.

- If you don't see one, consult the pool's owner's manual or contact a pool professional.

4. Connect a Hose to the Drain:

- Attach one end of the hose to the drain outlet and secure it tightly with a hose clamp or other suitable method.

5. Extend the Hose:

- Run the other end of the hose to the desired discharge location, which can be a nearby storm drain, ditch, or other safe area where water can be discharged legally and safely.

6. Submersible Pump (Optional):

- If your pool doesn't have a drain or if the water level is too low for gravity drainage, you may need a submersible pump. Place it in the deepest part of the pool, connect the discharge hose, and power it on.

7. Drain the Pool:

- Open the drain valve or turn on the submersible pump to start draining the pool.

8. Monitor the Pool Level:

- Keep an eye on the water level in the pool to ensure that it's draining properly and without causing any flooding issues.

9. Remove Debris:

- During the draining process, use a pool vacuum or a net to remove leaves, debris, and any floating objects from the water.

10. Close the Drain:

- Once the water level is down to the drain's level, close the drain valve or disconnect the submersible pump and remove it from the pool.

11. Clean Up:

- Once the pool is completely drained, thoroughly clean the pool's surface, including the walls and bottom.

12. Legal and Safety Considerations:

- Some areas may have specific regulations or requirements for draining a pool. Check with your local authorities to ensure you're following the applicable laws.

Remember, completely draining a pool can impact its structure, tiles, coping, and other components, so it's important to consult with a pool professional or refer to the pool's owner's manual before initiating the process.