How do you unplug a shower head?

1. Turn off the water supply to the shower. This is usually done by turning a valve located behind or underneath the shower fixture.

2. Once the water is turned off, remove the shower head from the shower arm. This can usually be done by unscrewing the shower head counterclockwise. If the shower head is hard to turn, you may need to use a wrench.

3. Once the shower head is removed, you will see the water supply line. Disconnect the water supply line from the shower head by unscrewing it counterclockwise.

4. Once the water supply line is disconnected, the shower head is unplugged. You can now clean the shower head or replace it with a new one.

Here are some tips for unplugging a shower head:

* If the shower head is hard to turn, you may need to use a lubricant. A silicone-based lubricant is best.

* Be careful not to drop the shower head. If the shower head is made of glass, it could break.

* If you are replacing the shower head, make sure to choose one that is compatible with your shower fixture.