What do you when your pool has too much water?

1. Turn off the water supply to the pool. This is the most important step, as it will prevent any more water from entering the pool and making the problem worse.

2. Use a submersible pump to remove water from the pool. Submersible pumps are available at most hardware stores, and they are relatively easy to use. Simply place the pump in the pool, plug it in, and turn it on. The pump will then begin to remove water from the pool.

3. Use a hose to drain water from the pool. If you don't have a submersible pump, you can also use a hose to drain water from the pool. Simply attach the hose to the pool's drain valve, and then open the valve. The water will then begin to drain from the pool.

4. Monitor the water level in the pool. As you are removing water from the pool, be sure to monitor the water level. Stop removing water when the water level reaches the desired level.

5. Turn the water supply back on to the pool. Once the water level has reached the desired level, you can turn the water supply back on to the pool. Be sure to check the water level again after you have turned the water supply back on, to make sure that the water level is still at the desired level.

6. Check for any leaks in the pool. If the water level in the pool continues to rise, there may be a leak in the pool. You should inspect the pool for any cracks or holes, and repair any leaks that you find.