Why wont bissell pro heat dispense water?

There are a few reasons why your Bissell Pro Heat carpet cleaner might not be dispensing water.

1. The water tank is empty. Make sure that the water tank is filled to the MAX fill line with hot tap water.

2. The water valve is closed. Check that the water valve is open and in the "ON" position.

3. The water hose is kinked or damaged. Inspect the water hose for any kinks or damage. If the hose is kinked, straighten it out. If the hose is damaged, replace it.

4. The water pump is not working. If the water pump is not working, the carpet cleaner will not be able to dispense water. To check the water pump, turn on the carpet cleaner and listen for a humming noise. If you do not hear a humming noise, the water pump is not working and will need to be replaced.

5. The water filter is clogged. If the water filter is clogged, it can restrict the flow of water to the carpet cleaner. To clean the water filter, remove the water tank and rinse the filter under a stream of warm water.

6. The spray nozzles are clogged. If the spray nozzles are clogged, they will not be able to dispense water properly. To clean the spray nozzles, use a soft cloth to wipe them clean. You can also use a toothpick or a small brush to remove any stubborn dirt or debris.

If you have tried all of these solutions and your Bissell Pro Heat carpet cleaner is still not dispensing water, you should contact Bissell customer service for further assistance.