Have a laars lite 2 pool heater and cannnot get pilot to even you hear gas bleeding but it will not lite?

1. Make sure the gas supply is turned on. The pilot light needs a steady supply of gas to stay lit. Check that the gas valve is open and that there are no kinks or obstructions in the gas line.

2. Check the thermocouple. The thermocouple is a safety device that shuts off the gas supply if the pilot light goes out. If the thermocouple is damaged or dirty, it can prevent the pilot light from lighting. Clean the thermocouple with a wire brush and make sure it is properly positioned in the pilot flame.

3. Check the igniter. The igniter is what sparks the pilot light. If the igniter is not working, the pilot light will not light. Check the igniter for any damage and make sure it is properly positioned.

4. Check the gas pressure. The gas pressure needs to be within a certain range for the pilot light to light properly. If the gas pressure is too high or too low, the pilot light will not light. You can check the gas pressure using a gas pressure gauge.

5. Clean the pilot assembly. Over time, the pilot assembly can become dirty or clogged, which can prevent the pilot light from lighting. Remove the pilot assembly and clean it with a wire brush. Make sure to clear any debris from the burner orifice.

If you have checked all of these things and the pilot light still will not light, you may need to call a professional for assistance.