Home Outdoor Sports FAQS Fishing Golf swimming Skiing and Skating Cycling Climbing Other Outdoor Sports Camping

How do you remove air from hot water tank with well water?

To effectively remove air from a hot water tank using well water, follow these steps:

1. Turn Off the Water Supply:

-Locate the main water supply valve that controls the water flow to the hot water tank. Turn the valve clockwise to shut off the water supply completely.

2. Turn on Hot Water Taps:

- Open all hot water taps in your house. This will allow air to escape as you drain the hot water tank.

3. Drain the Hot Water Tank:

- Connect a hose to the drain valve located at the bottom of the hot water tank. Ensure that the other end of the hose is directed to a drain or outside area where the water can be discharged safely.

- Open the drain valve to let the water drain out. This will remove most of the water and the trapped air inside the tank.

4. Close the Drain Valve:

- Once the tank is empty, close the drain valve securely to prevent any water leakage.

5. Refill the Hot Water Tank:

- Turn the main water supply valve counterclockwise to restore the water supply to the hot water tank.

- Allow the tank to fill up completely. As the tank fills, the remaining air pockets should rise to the top.

6. Bleed the Pressure Relief Valve:

- Locate the pressure relief valve on the top of the hot water tank. Place a bucket underneath the valve to catch any dripping water.

- Pull up the lever on the pressure relief valve several times to release trapped air. This will allow any remaining air to escape from the system.

7. Check for Leaks:

- Inspect the drain valve, pressure relief valve, and any connections to ensure there are no leaks. Tighten any loose connections if necessary.

8. Turn On Hot Water Taps:

- Turn off the hot water taps that were left open earlier. This will help purge any remaining air from the faucet and pipes.

9. Check the Water Temperature:

- Once all the taps are closed, turn on a hot water tap to check the water temperature. If it is not hot enough, adjust the temperature setting on your hot water tank as desired.

By following these steps, you should successfully remove the air from the hot water tank and restore the efficient flow of hot water for your household.


Copyright © www.mycheapnfljerseys.com Outdoor sports All Rights Reserved