How do you cut a solar pool cover for free form pool?

Cutting your own solar pool cover for a free-form pool can be a simple task with the right tools and technique. Here's a step-by-step guide to help you properly cut a solar pool cover for your free-form pool:

1. Gather Materials:

- Measuring Tape

- Fabric Shears or Utility Knife

- Pencil or Fabric Marker

- Solar Pool Cover

2. Prepare the Area:

- Clear the area where you'll be cutting the pool cover to avoid any tripping hazards or damage to your cover.

3. Measurements:

- Carefully measure the dimensions of your pool's surface using a measuring tape.

- Measure the length, width, and depth of the pool, making sure to consider any curves or irregular edges.

4. Draw Pattern:

- Lay the solar pool cover flat on a large, clean surface.

- Using the pencil or fabric marker, draw a pattern onto the pool cover based on the measurements you took from your pool.

5. Cutting:

- Make sure the solar cover is lying completely flat without any wrinkles or folds as you draw the pattern.

- Leave around an extra 3 inches of cover around the perimeter to account for the edges.

6. Precision Cutting:

- Use the fabric shears or utility knife to cut along the lines you've drawn.

- Be careful to make precise and clean cuts to ensure the cover fits well.

7. Trim Excess Material:

- Once you've made the main cuts, trim away any excess material that may prevent your cover from fitting.

- Trim around curves and edges to ensure a snug fit.

8. Test Fit:

- Before attaching the pool cover, check to see if it fits well by spreading it over the pool's surface.

9. Adjustments:

- If needed, make minor adjustments to the cover's edges by trimming or folding them.

- Try to avoid cutting into the main part of the cover as much as possible.

10. Secure the Cover:

- Depending on the design of your pool cover, you might need to attach it to the pool's edges or anchor points to keep it in place.

Note: Some solar pool covers come with a pre-cut option. If your cover has predefined markings specific to your pool's shape, follow those manufacturer guidelines instead. Cutting free-form pool covers requires a bit of accuracy, so patience and precision are essential. If you want to be sure that your cover fits perfectly, consider hiring a professional to cut it for you.