How do you clear up an AG pool that has blue-gray cloudy water feels almost slick?

1. Test the Water:

- Use a water test kit or take a sample to a pool store to determine the water's chemical balance, specifically pH, chlorine or bromine levels, alkalinity, and calcium hardness.

2. Adjust Chemical Balance:

- pH should be between 7.2 and 7.8.

- Chlorine or bromine should be at the recommended level for your sanitizer.

- Adjust the alkalinity and calcium hardness to the appropriate levels.

3. Flocculant Treatment:

- Add a flocculant to help clump together small particles for better filtration. Follow the product's instructions for dosage and application.

- Let it work for several hours or overnight, allowing particles to settle at the bottom of the pool.

4. Vacuum and Brush:

- Thoroughly vacuum the pool to remove the settled particles.

- Brush the walls and bottom of the pool to dislodge any remaining dirt and debris.

5. Filter Clean-Up:

- Check and clean the pool filter.

- If it's a cartridge filter, rinse and clean it according to the manufacturer's guidelines.

- For sand filters, backwash and rinse the filter until the water runs clear.

6. Maintain Proper Sanitizer Levels:

- Keep the chlorine or bromine levels within the recommended range to ensure continuous disinfection.

7. Shock Treatment:

- Perform a shock treatment using a non-chlorine shock product.

- Follow the product's instructions for dosage and application.

- This will help eliminate bacteria and stubborn contaminants.

8. Run the Pool Pump:

- Ensure the pool pump is running for at least 8-12 hours per day, allowing for proper filtration and circulation.

9. Preventative Maintenance:

- Regularly monitor and maintain the water chemistry to prevent future issues.

- Cover the pool when not in use to prevent debris and contaminants from entering the water.

By following these steps, you can clear up the blue-gray cloudy water in your AG pool and restore it to a clean and inviting condition.