The pool is 1 inch deep in the shallow end and about 2 feet some parts of liner are wrinkled how do you get these out I have added water back into pool?

To remove wrinkles from your pool liner while the pool is full of water, try the following steps:

1. Drain some water from the pool: Reduce the water level by a few inches to make the liner looser and easier to adjust.

2. Smooth the liner: Using a pool brush or your hands, gently smooth out the wrinkles in the liner by pushing them towards the edges of the pool. Start from the shallow end and work your way towards the deep end.

3. Use a weighted object: Place a heavy object, such as a sandbag or a bucket filled with water, on top of the wrinkles to help hold them in place. Leave the weights in place for several hours or overnight.

4. Re-fill the pool: Slowly add water back into the pool until it reaches the desired level. As the pool fills up, the weight of the water will help to further smooth out the liner.

5. Adjust the liner: If there are still some minor wrinkles, you can adjust the liner by pulling it taut and securing it to the pool coping using liner lock strips or screws.

Remember to be patient and work carefully to avoid causing any damage to the pool liner. If the wrinkles are stubborn or difficult to remove, you may need to consult with a pool professional for assistance.