How do you flush out a laars xe pool heater if seem to be getting good flow through the heater?

1. Turn off the power to the heater.

2. Close the valves on the inlet and outlet lines of the heater.

3. Disconnect the inlet and outlet lines from the heater.

4. Remove the end caps from the inlet and outlet ports of the heater.

5. Flush water through the heater using a hose or a bucket.

6. Reinstall the end caps on the inlet and outlet ports of the heater.

7. Reconnect the inlet and outlet lines to the heater.

8. Open the valves on the inlet and outlet lines of the heater.

9. Turn on the power to the heater.

Here are some additional tips for flushing out a Laars XE pool heater:

- Use a descaling solution to remove any scale buildup from the heater.

- Be careful not to damage the heater when removing the end caps.

- If you are unable to remove the end caps, you may need to replace the heater.