How do you vacuum your pool with intex pump model 621?

1. Connect the vacuum head to the vacuum hose.

Make sure the vacuum hose is securely attached to the vacuum head.

2. Connect the other end of the vacuum hose to the skimmer.

This will allow the vacuum to suck up debris from the pool.

3. Connect the vacuum hose to the pump.

Make sure the hose is securely attached to the pump.

4. Turn on the pump.

The pump will begin to suck up water and debris from the pool.

5. Move the vacuum head around the pool.

Use the vacuum head to move debris towards the skimmer.

6. Empty the skimmer basket.

As the pump sucks up debris, it will collect in the skimmer basket. Empty the skimmer basket when it is full.

7. Continue vacuuming the pool until it is clean.

Keep moving the vacuum head around the pool until all of the debris has been removed.

8. Turn off the pump.

Once the pool is clean, turn off the pump.

9. Disconnect the vacuum hose.

Disconnect the vacuum hose from the skimmer, pump, and vacuum head.

10. Store the vacuum equipment.

Store the vacuum equipment in a cool, dry place.