What kind of silicone do i use around the sheet metal after covering a bad rusted spot in my above pool so edges arent sharp?

- 100% silicone. This means the sealant is made entirely of silicone, without any fillers or additives that can weaken the bond.

- Waterproof. The sealant must be able to withstand constant exposure to water, both chlorinated and saltwater.

- Flexible. The sealant must be able to flex and move with the pool liner without cracking or breaking.

- UV-resistant. The sealant must be able to withstand exposure to the sun's ultraviolet (UV) rays without breaking down or deteriorating.

You can use the following types of silicone sealants around sheet metal in your above-ground pool:

- Silicone caulk. This is a general-purpose silicone sealant that can be used for a variety of applications, including sealing around sheet metal.

- Silicone sealant. This is a heavy-duty silicone sealant that is specifically designed for use in wet environments, such as around pools.

- Marine sealant. This is a silicone sealant that is specially formulated for use in marine environments, where it is exposed to salt water and harsh weather conditions.

When applying the silicone sealant, be sure to:

- Prepare the surface. Clean and dry the surface of the sheet metal to remove any dirt, grease, or other contaminants.

- Apply the sealant. Apply the silicone sealant to the edges of the sheet metal, making sure to fill any gaps or cracks.

- Smooth the sealant. Use a putty knife or your finger to smooth out the silicone sealant and remove any excess.

- Allow the sealant to cure. Allow the silicone sealant to cure for 24 hours before exposing it to water or heavy traffic.

By following these tips, you can use silicone sealant to safely and effectively seal around sheet metal in your above-ground pool and protect it from rust.