How do you get your green cloudy above ground pool water clear?

1. Test the Water Chemistry:

- Use a pool test kit to check the pH, alkalinity, total chlorine, and cyanuric acid levels. Adjust these levels to their ideal ranges:

- pH: 7.2 – 7.8

- Alkalinity: 80 – 120 ppm

- Free Chlorine: 1 – 3 ppm

- Cyanuric Acid: 30 – 50 ppm

2. Shock the Pool:

- Use a chlorine shock treatment to kill algae and bacteria. Follow the product instructions for dosing.

- Run the pool filter continuously for at least 24 hours or as directed on the product label.

3. Clean the Pool Filter:

- Backwash the sand filter if you have one. Rinse until the water runs clear. If you have a cartridge filter, remove and clean it according to the manufacturer's instructions.

4. Brush the Pool:

- Use a soft pool brush to scrub the sides and bottom of the pool, paying special attention to areas with visible algae growth. Brush debris toward the skimmer.

5. Vacuum the Pool:

- Use a pool vacuum to remove dirt and debris from the bottom of the pool.

6. Add Algaecide:

- Add an algaecide to prevent further algae growth. Follow the recommended dosage instructions on the product label.

7. Run the Filter:

- Keep the pool filter running continuously for at least 12 hours per day to ensure proper circulation and filtration.

8. Monitor the Water Chemistry:

- Continue to test the water chemistry regularly and make adjustments as needed. Maintain the ideal pH, alkalinity, chlorine, and cyanuric acid levels.

By following these steps, you should be able to clear up the green cloudy water in your above-ground pool. Note that it may take a few days for the water to become completely clear. Avoid swimming in the pool while it is being treated or until the chlorine levels are within the appropriate range.