How do you clean a pool that has been neglected all year and have to drain it or can shock let the filter up?

If a pool has been neglected all year, it will likely be very dirty and could have algae growth, debris, and other contaminants in the water. In this case, it is best to drain the pool and clean it thoroughly.

To clean a neglected pool, you will need the following supplies:

* Pool brush

* Pool vacuum cleaner

* Pool shock

* Pool algaecide

* Pool filter cleaner

* Measuring cup

* Gloves

* Safety goggles

Instructions:

1. Drain the pool.

2. Scrub the pool walls, floor, and steps with a pool brush.

3. Vacuum the pool to remove any dirt, debris, and algae.

4. Add pool shock to the water according to the package directions.

5. Add pool algaecide to the water according to the package directions.

6. Let the pool water circulate for at least 8 hours.

7. Clean the pool filter according to the manufacturer's instructions.

8. Refill the pool with water.

9. Enjoy your clean pool!

If you do not have the time or ability to drain the pool, you can try to shock it and let the filter run. This may be effective if the pool is not too dirty. However, it is important to note that shocking the pool will not remove any debris or algae from the water. If the pool is very dirty, shocking it may not be effective.

Here are the instructions for shocking a pool:

1. Add pool shock to the water according to the package directions.

2. Let the pool water circulate for at least 8 hours.

3. Clean the pool filter according to the manufacturer's instructions.

4. Test the pool water and adjust the pH and alkalinity levels if necessary.

It is important to note that shocking a pool can be harmful to pool equipment, such as the liner, pump, and filter. If you are not sure how to shock a pool properly, it is best to consult with a pool professional.