What are the instructions for your watch its an armitron water resistant 330ft all sport acrylic case?

Here are the instructions for your Armitron Water Resistant 330ft All Sport Acrylic Case watch:

Setting the Time:

1. Pull out the crown located on the right side of the watch in the "full-out" position.

2. Turn the crown clockwise to set the hour and minute hands to the desired time.

3. When done setting the time, push the crown back into its original position.

Setting the Date:

1. Pull the crown out to the "first-click" position.

2. Turn the crown clockwise to set the date to the desired day.

3. Push the crown back to the original position.

Activating the Stopwatch:

1. Press the upper button on the right side of the watch to start the stopwatch.

2. Press the upper button again to stop the stopwatch.

3. Press the lower button to reset the stopwatch to zero.

Setting the Alarm:

1. Pull out the crown to the "full-out" position.

2. Turn the crown counterclockwise to set the alarm to the desired time.

3. When done setting the alarm, push the crown back to its original position.

Water Resistance:

Your watch is water-resistant up to 330 feet (100 meters), which means it is suitable for swimming and snorkeling, but not for scuba diving or other extreme water sports.

Care and Maintenance:

1. Rinse the watch with fresh water after use in saltwater.

2. Avoid exposing the watch to extreme temperatures or sudden temperature changes.

3. Clean the watch with a soft cloth and mild soap, and avoid using harsh chemicals or abrasives.

4. Have your watch serviced by an authorized Armitron service center once every 2-3 years.