How do you fix an above ground pool that is full of water and not level?

Step 1: Drain the pool water

- Use a submersible pump or a garden hose to drain the water from the pool until the water level is below the lowest point of the pool wall.

Step 2: Level the pool

- Place a carpenter's level on the pool wall at several points around the pool to check the level.

- If the pool is not level, use a shovel or a pool jack to raise the low side of the pool.

- Tamp the soil around the pool to make sure it is firm.

Step 3: Refill the pool

- Use a garden hose or a pool filter to refill the pool with water.

Step 4: Check the water level

- Use a carpenter's level to check the water level around the pool to make sure it is even.

- If the water level is not even, adjust the pool legs or the pool jack to level the pool.

Step 5: Add chemicals to the pool

- Add the appropriate chemicals to the pool water to keep it clean and sanitized.

Step 6: Enjoy your pool!

- Your above ground pool is now level and ready to enjoy!