How much bleach to clear green pool 7500 gallon?

To clear a green pool of 7,500 gallons, you will need to shock it with chlorine. The amount of chlorine needed will depend on the chlorine concentration of the pool water. If the chlorine concentration is below 1 ppm, you will need to add 1 pound of chlorine for every 10,000 gallons of water. If the chlorine concentration is between 1 and 3 ppm, you will need to add 1/2 pound of chlorine for every 10,000 gallons of water. If the chlorine concentration is above 3 ppm, you should not need to add any additional chlorine.

In addition to shocking the pool with chlorine, you may also need to brush the pool walls and vacuum the pool floor to remove any algae that has built up. You should also keep the pool filter running continuously until the water is clear.

Here are the steps you should follow to clear a green pool:

1. Test the pool water chlorine concentration.

2. Add the appropriate amount of chlorine to the pool.

3. Brush the pool walls and vacuum the pool floor.

4. Keep the pool filter running continuously until the water is clear.