How do you remove aluminum inground pool coping?

Removing aluminum inground pool coping involves careful planning, safety measures, and the following steps:

1. Preparation:

- Ensure that the pool is drained and any water sources are turned off.

- Check local regulations and building codes for any specific requirements.

- Gather necessary tools and equipment, including a pry bar, hammer, mallet, crowbar, hacksaw, safety glasses, and gloves.

2. Disconnect Coping Strips:

- Locate the coping strips that hold the coping in place.

- Using the pry bar and/or hacksaw, carefully pry or cut the coping strips to release the coping.

3. Remove Coping Sections:

- Start from one corner of the pool and use the pry bar and hammer to gently pry the coping sections upward and away from the pool deck.

- Take care not to damage the pool deck surface or the coping sections themselves.

4. Clean the Pool Deck:

- Once all the coping sections are removed, use a stiff brush and water to clean the pool deck surface, removing any debris or leftover sealant.

5. Prepare for New Coping:

- Level the pool deck surface, filling any gaps or irregularities that might affect the proper installation of the new coping.

6. Consult with Professionals:

- Depending on the type and complexity of your inground pool, consider consulting with a pool professional or contractor for specialized advice and guidance on removing aluminum coping.

Remember to prioritize safety throughout the process and handle the coping sections with care to avoid injuries.