What should you do if have a large hole in the bottom of your paddling pool?

1. Empty the Pool:

- Completely drain the paddling pool to make it easier to work on the hole.

2. Clean the Area:

- Thoroughly clean the area around the hole with a brush and some mild detergent. Ensure that the surface is free from dirt and debris.

3. Prepare the Patch:

- Cut a piece of heavy-duty plastic sheeting or a pool patch kit that is larger than the hole. If using a patch kit, follow the manufacturer's instructions.

4. Apply Adhesive:

- Generously apply a strong adhesive, such as a vinyl adhesive or a pool repair glue, to the underside of the patch.

5. Place the Patch:

- Carefully place the patch over the hole, ensuring that the edges are firmly pressed down and the adhesive is spread evenly.

6. Weight Down the Patch:

- Place heavy objects, such as bricks or books, on top of the patch to ensure good adhesion. Leave it to set according to the adhesive instructions.

7. Allow to Dry:

- Let the adhesive dry completely. The drying time may vary based on the adhesive and the manufacturer's recommendations.

8. Refill the Pool:

- Once the patch is dry and secure, you can refill the paddling pool with water.

Additional Tips:

- If the hole is on the side of the pool, you can use a pool repair tape or a self-adhesive patch to seal it.

- If the hole is too large for a simple patch, you may consider cutting out the damaged section of the pool and using a heavy-duty repair patch or contacting a professional pool repair service for assistance.