Are there simple step by instructions for installing a Doughboy pool liner that is 48 feet long and oval?

1. Measure your pool. You will need to know the length, width, and depth of your pool in order to purchase the correct size liner.

2. Prepare your pool. Remove all debris from the pool and sweep the bottom clean. If there are any sharp objects, such as rocks or roots, you will need to remove them before installing the liner.

3. Install the liner. Start by unfolding the liner and placing it in the pool. Be careful not to crease or tear the liner. Once the liner is in place, smooth it out and make sure that it is evenly distributed around the pool.

4. Fill the pool with water. Once the liner is installed, you can start filling the pool with water. Be sure to fill it slowly so that the liner does not stretch too much.

5. Trim the liner. Once the pool is full of water, you will need to trim the excess liner. Use a sharp knife to cut the liner along the edge of the pool. Be careful not to cut the pool wall.

6. Install the coping. The coping is the material that covers the edge of the pool. It can be made from a variety of materials, such as concrete, plastic, or metal. To install the coping, simply place it around the edge of the pool and secure it with screws or nails.

7. Add water. Once the coping is installed, you can add water to the pool until it reaches the desired level.