What is the best way to fix holes in mesh pool cover?

• A patch of mesh fabric that is larger than the hole

• A pair of scissors

• A needle and thread

• A thimble

• A piece of cardboard or plastic

Instructions:

1. Cut the patch of mesh fabric to a size that is about 2 inches larger than the hole on all sides.

2. Fold the edges of the patch under 1/2 inch twice and press flat.

3. Place the patch over the hole on the mesh pool cover.

4. Use the needle and thread to sew the patch in place, starting and ending with a knot.

5. To prevent the patch from coming loose, place a piece of cardboard or plastic under the patch before you sew it in place.

6. Allow the patch to dry completely before using the pool cover.

Here are some tips for repairing holes in mesh pool covers:

• Use a patch of mesh fabric that is made from the same material as the pool cover.

• Make sure the patch is larger than the hole on all sides.

• Fold the edges of the patch under twice before sewing it in place.

• Use a strong thread and a needle that is sharp enough to pierce the mesh fabric.

• Start and end the sewing with a knot.

• Allow the patch to dry completely before using the pool cover.