The water pump in a foxxx pool is not pumping into your filter It running what other reason could cause this?

1. Clogged filter: If the filter is clogged, it will not allow water to flow through it, and the pump will not be able to circulate water. Check the filter and clean it if necessary.

2. Closed or partially closed valves: If any of the valves in the pool plumbing system are closed or partially closed, they will restrict water flow and prevent the pump from circulating water. Check all valves and make sure that they are open.

3. Broken or damaged pump impeller: The impeller is a critical component of the pump that helps to move water. If the impeller is broken or damaged, it will not be able to circulate water. Check the impeller for any damage and replace it if necessary.

4. Air leak: If there is an air leak in the suction line, it will cause the pump to lose its prime and will not be able to circulate water. Check for any leaks and repair them as necessary.

5. Low water level: If the water level in the pool is too low, the pump will not be able to draw water in and will not be able to circulate water. Make sure that the pool water level is at the appropriate level.

6. Electrical problem: If there is an electrical problem, it may prevent the pump from running or may not allow it to circulate water properly. Check the electrical connections and circuit breaker and ensure that the pump is receiving power.

If you are unable to resolve the issue yourself, you may need to call a qualified pool technician to diagnose and fix the problem.