How can you patch marcite pool finish?

To patch a marcite pool finish, you will need the following materials:

* Marcite patch kit

* Trowel

* Sandpaper

* Pool brush

Instructions:

1. Clean the area around the damaged area with a pool brush.

2. Apply the marcite patch material to the damaged area using a trowel.

3. Smooth out the patch material with the trowel.

4. Allow the patch material to dry for the amount of time specified on the packaging.

5. Sand the patch area with sandpaper to smooth out any rough edges.

6. Brush the pool surface to remove any debris.

7. Refill the pool with water.

The patched area should now be repaired and the pool should be ready to use

Outdoor Sports: What were the advantages of travel by water?; college pitching; 13 year old, ht, vert, reach, playing experience; Sea Fishing Tackle Report: The Abu Garcia Ambassadeur Revo Winch Baitcast Reel; Sea Fishing Tackle Evaluation: The Daiwa Windcast X 5500 Fixed Spool Fishing Fishing Reel; LED fishing light- Real powerful function you should know; Depth Finders Tell You A Lot More Than Depth; 6 Steps For A Correct Golf Swing; What to Expect at Your First Bike Race

Butterfly Stroke Drills

Wreck fishing is a type of fishing done in rough bottom, artificial reefs and shipwrecks. Ther

THERE always used to be a trend to think small in winter. Angler’s Mail blogger Col

(Blake Russell photo)