How much does it cost to run a garden hose for one hour on full blast?

The cost of running a garden hose for one hour on full blast can vary depending on several factors, including the water rate in your area, the diameter of the hose, and the water pressure. Here's a general calculation to estimate the cost:

1. Determine the water flow rate of your hose:

- The flow rate is typically measured in gallons per minute (GPM).

- You can find the GPM rating on the hose packaging or by checking the manufacturer's specifications.

- For example, a typical garden hose may have a flow rate of 5 GPM.

2. Calculate the total water usage for one hour:

- Multiply the flow rate (GPM) by 60 minutes (since you're running the hose for one hour).

- For example, with a flow rate of 5 GPM: 5 GPM * 60 min = 300 gallons.

3. Determine the cost of water in your area:

- The cost of water can vary significantly from one region to another.

- You can find the current water rates by checking your water bill or contacting your local water utility company.

- For example, suppose the water rate in your area is $2.50 per 1,000 gallons.

4. Calculate the cost of running the hose:

- Divide the total water usage (gallons) by 1,000 to convert it to thousands of gallons.

- Multiply this value by the water rate.

- For example, with a water rate of $2.50 per 1,000 gallons and a water usage of 300 gallons: (300 gallons / 1,000) * $2.50 = $0.75.

So, in this example, running a garden hose with a flow rate of 5 GPM for one hour on full blast would cost approximately $0.75 based on the given water rate.

Please note that these calculations are approximate and may vary depending on actual water rates and hose specifications.