Pool Equipment Needed To Maintain pH Levels in Salt and Chlorine Swimming Pools

The alkalinity and acidity of your outdoor pool is very essential to keeping it a safe facility for your family to enjoy. If you go anywhere above or below the standard ...

The alkalinity and acidity of your outdoor pool is very essential to keeping it a safe facility for your family to enjoy. If you go anywhere above or below the standard level of 7.4 and 7.6, there is a huge possibility that microbes will take over and infect every user, among other things. There抯 a number of pool equipment you can utilize to keep the water抯 pH level balanced either for salt water swimming pools or chlorine water alternatives. But, you first have to know what the impact of pH levels are to both situations, so that you can determine what you need for either.

If the water is acidic, it will be easy for it to corrode metal structures, thereby making rust contamination a likely possibility. On top of that, acidic water also allows algae to thrive. If there抯 too much water alkalinity, meanwhile, dirt and dust stick to it more intensely, making it dirty easily for a short period of time. Now, you might think chlorine would do a good job in disinfecting the facility, but both acidic and alkaline water counteract its method, thereby making it obsolete. And with the fact that it irritates the skin at both states, there抯 no doubt that having low and high pH levels are not acceptable for any household.

To correct too much alkalinity, all you have to do is start a water pump and filter system to remove the unwanted microbes, and then introduce acidic treatments, such as cyanuric or muriatic acid. You should see to it that you add a little at a time, and closely monitor the levels with testing strips. It is also important that you handle these substances with care, as they can cause skin burns. If it is acidic water you have to deal with, instead of acids, you will have to introduce alkaline substances to the pool water in order to restore its balance. This will include soda ash and baking soda. Again, the water pump will play a huge part in distributing the component, and whether involving salt water swimming pools or traditional chlorine, they will remain to be essential gear for correcting the chemistry level. Other pool equipments necessary to keep the stability of the water抯 pH level are nets, stiff bristle brushes and cleansers.

One important distinction a pool owner must take note of is that an additional treatment must be given to a chlorine based pool. A shock treatment pool equipment chemical must be introduced to the water every week to keep chlorine from binding to nitrogen and ammonia and doing its job. For salt water swimming pools, this will not be necessary, since it has a natural electrolyte process that prevents that.

It will be difficult to wrap your head around this responsibility, especially if you have other obligations to attend to. Maintaining the chemistry levels of your outdoor pool is a tedious task. To minimize the burden it imposes, you could get professionals to do daily check-ups and regulation. It will be a bit expensive, obviously. But if you love your pool and are concerned for your family抯 well-being while using it, expert assistance will be a worthwhile investment.