How do you drain an above ground pool completely and save the liner One side of wall is bowing I need to fix it. If work quickly can How?

To completely drain an above-ground pool and save the liner while one side of the wall is bowing, you will need to work quickly and carefully. Here's a step-by-step process to follow:

Step 1: Disconnect and Remove Pool Equipment

- Turn off the power to the pool pump and filter system.

- Disconnect the hoses and remove any attached pool equipment, such as skimmers, return jets, and ladders.

- Plug any open holes in the pool wall to prevent water from leaking out.

Step 2: Partially Drain the Pool

- Use a submersible pump or a garden hose to drain about half of the water from the pool. This will reduce the pressure on the pool walls and make it easier to manage the remaining water.

Step 3: Support the Bowing Wall

- Use sturdy wooden planks or beams to support the bowing wall from the outside of the pool. Place the supports at regular intervals along the wall to prevent further bowing.

- Secure the supports in place using rope, straps, or clamps to ensure they remain stable during the draining process.

Step 4: Continue Draining the Pool

- Continue draining the pool until the water level is just below the level of the bowing wall. This will help to further relieve pressure on the wall.

Step 5: Fix the Bowing Wall

- While the pool is still partially drained, repair the bowing wall. You can use a combination of methods, such as re-aligning the wall panels, replacing damaged supports, or installing additional support braces. Depending on the severity of the damage, you might need to contact a professional pool technician for assistance.

Step 6: Completely Drain the Pool

- Once the bowing wall is repaired and secure, you can continue draining the remaining water from the pool.

Step 7: Clean and Store the Pool Liner

- Remove the pool liner from the pool and spread it out on a clean, dry surface. Check for any tears, punctures, or damage to the liner.

- If there are any minor tears or punctures, repair them using a pool liner repair kit.

- Clean the pool liner thoroughly with a mild detergent and water. Dry it completely before storing it in a cool, dry place.

Step 8: Reinstall the Pool Liner and Equipment

- Wait until the repaired bowing wall is completely dry before reinstalling the pool liner.

- Reinstall the pool liner carefully, ensuring it is properly seated and aligned with the pool walls.

- Reconnect the pool equipment, such as the pump, filter, skimmers, and return jets.

- Fill the pool with water slowly and evenly.

Regularly inspect your above-ground pool for any signs of damage or wear and tear, especially if it has experienced bowing walls in the past. By following these steps, you can safely drain and repair your pool and save the liner while minimizing damage. However, if the damage is extensive or the bowing wall is severely compromised, it's best to consult a professional for proper repair.