What might cause the polaris pool vac to just float around and not go bottom of pool?

- Clogged Filter Bag: A clogged filter bag can reduce water flow and affect the vacuum's ability to move effectively. Remove the filter bag, rinse thoroughly, and reinstall.

- Trapped Air in the Pool Cleaner: Trapped air can cause the cleaner to float to the surface. Turn the cleaner off and shake gently under the water to remove any trapped air bubbles.

- Low Water Pressure: Insufficient water pressure can hinder the cleaner's ability to operate properly. Check the pool pump and hose connections to ensure adequate water pressure.

- Damaged Suction Line: Leaks or damage to the suction line can affect the vacuum's suction power. Inspect the suction line for any cracks, holes, or leaks, and replace as needed.

- Worn-Out Brushes or Tracks: Worn-out brushes or tracks can reduce the cleaner's grip on the pool surface and cause it to slip or float. Inspect and replace any worn-out parts.

- Incorrect Assembly: Ensure the pool cleaner is properly assembled per the manufacturer's instructions. Improper assembly can affect its functionality and ability to move efficiently.

- Pool Debris or Obstacles: Large debris or obstacles can trap the cleaner and prevent it from moving freely. Check for and remove any obstacles that may be causing interference.

- Damaged Motor or Gears: A faulty motor or damaged gears can impact the cleaner's movement. In this case, it is recommended to contact the manufacturer or seek professional assistance.