Once a gunite pool is converted to vinyl liner can you convert it back being I live in the Panhandle of Florida and have no problem with ground water?

It is possible to convert a vinyl liner pool back to a gunite pool, but it is a complex and expensive process. Here is a general overview of the steps involved:

1. Remove the vinyl liner. The vinyl liner is typically removed by cutting it into sections and then pulling it out of the pool.

2. Clean the pool shell. The pool shell must be thoroughly cleaned to remove any dirt, debris, or algae that may have accumulated.

3. Repair the pool shell. Any cracks or damage to the pool shell must be repaired before it can be converted to gunite.

4. Install a new gunite lining. The new gunite lining is sprayed onto the pool shell in a series of layers.

5. Cure the gunite. The gunite must be allowed to cure for a period of time before it can be used.

6. Finish the pool. The pool must be finished with a sealant and a coping material.

The total cost of converting a vinyl liner pool back to a gunite pool can vary depending on the size and condition of the pool. In general, the cost can range from $15,000 to $30,000.

It is important to note that converting a vinyl liner pool back to a gunite pool is a major undertaking. If you are considering this option, it is important to consult with a qualified pool professional to discuss the pros and cons and to get an accurate estimate of the cost.