Can you eliminate the pool tile and have plaster only?

Eliminating the tile and having only the plaster pool requires some considerations and certain steps. Here's a general outline of the process:

1. Preparation:

- Drain the pool completely to allow the surface to be inspected and prepared.

- Remove all the tile pieces carefully, using appropriate tools and techniques to prevent damage to the pool structure.

2. Pool Surface Assessment:

- Evaluate the condition of the pool surface under the tile. Check for cracks, damage, or areas that may need repairs or resurfacing before applying plaster.

3. Surface Preparation:

- Clean and roughen the pool surface using tools such as a grinder or sandblaster to create a good bond for the plaster.

- Repair any cracks, voids, or structural issues in the pool surface to ensure a smooth and stable base for the plaster.

4. Application of Bonding Agent:

- Apply a bonding agent or slurry specifically designed for plastering to enhance adhesion between the pool surface and the plaster.

5. Plaster Mixing:

- Mix the plaster according to the manufacturer's instructions. This usually involves combining Portland cement, sand, pigments (if desired), and water.

6. Application of Plaster:

- Apply the plaster mixture to the pool surface using a pool trowel or specialized tools. Ensure an even and consistent application to achieve the desired thickness.

- Smooth out the plaster surface to eliminate any imperfections and create a smooth finish.

7. Curing and Maintenance:

- Allow the plaster to cure and set properly, following the recommended drying time specified by the plaster manufacturer.

- Maintain the pool water chemistry according to the plaster manufacturer's recommendations to prevent damage or staining.

It's important to note that removing pool tile and transitioning to plaster is a complex process that requires expertise in pool resurfacing. It is recommended to consult with professionals experienced in pool renovation to assess your specific pool's condition, determine the suitability of removing tile, and carry out the process effectively to ensure a long-lasting and quality pool finish.