What do you about rusty top rails on an above ground salt water pool?

Rusty top rails on an above-ground salt water pool are a common problem, but there are a few things you can do to prevent and remove rust.

Prevention:

* Keep the pool water balanced. The ideal pH level for a salt water pool is between 7.2 and 7.8. When the pH level is too high or too low, it can cause the water to become corrosive and damage the metal parts of the pool, including the top rails.

* Rinse the pool cover regularly. If you have a pool cover, it's important to rinse it off regularly to remove any dirt, debris, or salt water that could cause corrosion.

* Apply a protective coating to the top rails. There are a number of commercial products available that can help protect the top rails of your pool from rust. These products typically contain a wax or sealant that helps to repel water and salt water.

Removal:

If the top rails of your pool are already rusty, there are a few things you can do to remove the rust.

* Use a wire brush to remove the loose rust. Be careful not to damage the metal underneath the rust.

* Apply a rust remover to the top rails. Follow the instructions on the product label carefully.

* Rinse the top rails thoroughly with water.

* Apply a protective coating to the top rails.

By following these steps, you can help to prevent and remove rust from the top rails of your above-ground salt water pool.