How can you move ground water away from an inground pool dig?

Excavation: Perform a proper excavation to remove any pre-existing water from the work area. This involves digging several drainage trenches around the pool perimeter, sloping the bottom of these trenches towards a sump pit, and installing perforated pipes within these trenches to facilitate water flow towards the sump pit.

1. Sump Pump: Install a sump pump within the sump pit to collect water drained from the excavation site and pump it away from the area. Ensure your pump is powerful enough to handle a high water inflow rate.

2. Gravel or Sand Barrier: Surround the pool dig with a gravel or sand barrier to filter water away from the site. The porous nature of these materials allows water to permeate through them, creating a barrier that prevents water from seeping into the excavation area.

3. Slope and Drainage: Slope the terrain around the pool dig to ensure proper water drainage away from the site. This can be done by gradually angling the ground surface away from the pool's perimeter.

4. French Drain: Install a french drain system around the pool area. It involves digging a narrow, gravel-filled trench around the pool, sloping the bottom towards a drain pipe. This provides an additional path for water to flow away from the pool area.

5. Well Point System: For areas with exceptionally high water tables, installing a well point system might be necessary. This system comprises several well points (perforated pipes) placed in the ground near the pool area that efficiently lowers the water table.

6. Retaining Walls: If necessary, construct retaining walls to stabilize the soil and prevent water flow towards the pool dig. Ensure the walls extend below the water table depth.

8. De-Watering: Use de-watering pumps to efficiently remove water from the pool dig. This is particularly helpful in emergency situations or when the water inflow is excessive.

9. Geotextile Filter Fabric: Install geotextile filter fabric between the soil and gravel or sand layers to prevent fine soil particles from clogging the drainage system.

10. Regular Monitoring and Maintenance: Constantly monitor the water levels around the pool dig to ensure the drainage system is functioning effectively. Regularly clean and maintain drainage systems, sump pits, and pumps to prevent blockages.