How do you run a jet ski out of the water?

When you're done riding your jet ski, bringing it back to shore is a crucial task to ensure your safety. Here's how to run a personal watercraft out of the water:

1. Beach Safely: Approach the shore slowly and choose a sandy, clear spot free of obstacles like rocks, debris, or people.

2. Shut Off Engine: Turn off the engine once you're close to shore.

3. Stay Clear: Get off your jet ski and stand in a safe area away from the watercraft and the propeller.

4. Engage Parking Brake: Pull up or activate the parking brake to prevent the jet ski from rolling away.

5. Secure Watercraft: Tie the jet ski to a stable object on shore using a sturdy rope or strap to keep it from floating away.

6. Empty Water: Drain any water from the jet ski's bilge area or hull.

7. Rinse: Use fresh water to rinse off saltwater, sand, and mud from the watercraft to prevent corrosion and damage.

8. Check Damage: Inspect the jet ski for any signs of damage, such as cracks, leaks, or loose parts, and address them promptly.

9. Wash and Dry: Wash and dry the exterior thoroughly to remove any remaining saltwater or debris.

10. Cover and Store: Place a cover over the jet ski to protect it from the elements, and store it in a secure location when not in use.

By following these steps, you can safely bring your jet ski out of the water and protect it for future use.

Additional Tips for Safe Jet Ski Operation:

- Always wear the manufacturer-recommended personal flotation device (PFD).

- Obey designated speed limits and be cautious of other watercraft and swimmers.

- Avoid riding under the influence of alcohol or drugs.

- Regular maintenance and inspection are essential to ensure your jet ski remains safe and reliable.

Enjoy your jet skiing adventures responsibly, and prioritize your safety and the safety of others on the water.