how to attach grind plates

Question
hi
I have bought my son a pair of Roces M12 UFS, I don't know how to attach the grind plates it comes with. The instructions sort of explain it but don't understand. There are two plates and even taking the 2 middle wheels out it does not seem obvious where to put them as there is a middle block which to me would stop you from grinding anyway.
would apprediate any advice.
cheers
Theresa Chalk

Answer
Hi Theresa,
 I wish I could be more help but this is not really my area of expertise.  Most grind plates have a hole in each end and are attached by removing 2 of the bolts that hold the 2 center wheels on.  

 The grind plate slides in between the wheel and the outer medal frame.  You put the bolts back in the same way they came out but now it's holding the grind plate and the wheel also.

  It appears that the medal frame has a section in the middle that curves up.  You should be able to see the grind plate in this area once it's in place.  

  I hope this help a little bit.  If not I would suggest you stop in at a sports store and perhaps they can help you or contact the manufacturer.

Good Luck
Pat