380 jennings semi auto handgun

Question
how do i break down the 380 semi auto handgun made by jennings? can you send me pictures?

Answer
Jennings/Bryco will send you an exploded view picture if you ask them for it.  To strip:

-verify it is unloaded, and keep muzzle pointed in a safe direction.
-Pull back the slide about 1/4".
-Depress the takedown button in the rear of the slide.
-With the button depressed, move the rear of the slide back and up.
-You can now pull the slide off from the front. The barrel is pinned to the frame. The takedown button, striker, and spring will fall out of the slide.

Be careful about turning the frame over. Lots of little pieces-parts will fall out that are held in place by gravity alone.


Hope this helps!

Dave