QuestionI'm buying a gravity nano. I stand around board 20-18 throw at around board 8, my walk path is a little to the right(may be 5 board difference) I normally run around 190 average. I like a early to mid-lane hook rather than a hard back end. Where would be the ideal pin placement in reguards to the ring finger. I'm right handed and I get very lazy with my lift, I'm looking for something when I get lazy but the ball will still finish near the pocket.
Thank you
Answer
www.TrueBowlerAdjustme
Louis, telling you where to place the pin is a guessing game. Obviously, your speed, whether you spin the ball or forward roll the ball comes into play. An important aspect of your question is, what are the lane conditions you will be playing on? Are they oily, medium, or dry? Are those same patterns short, medium, or long in distances down lane. Each house has a tendency to be different to offer some variety to its customers while still offering a good scoring environment.
Since you have decided on purchasing the Nano, please look at storm's website for your release characteristics. It presents ball paths for Strokers, Tweeners, and Crankers. Your style and ball layout may be best served by a drilling presented on their "download" tab.
When drilling a ball, pro shops and coaches must consider all the things mentioned above and if a bowler tracks high or low to the finger holes.
If I suggest that you pin your ball above your ring finger, this could cause your bowling ball to go straight with no reaction. If I suggest pinning it to 1 o'clock or 3 o'clock and you track low, this could cause your ball to react too soon and end up making your shot go brooklyn most often.
Finding your Positive Axis Point(PAP) on one of your current bowling balls is your best start. Your pro shop professional can help you do that, along with identifying whether your track high on your bowling ball or low. Use a ball that you like that doesn't hook a lot.
Keep in mind, when drilling a "big" ball such as the Nano, most bowlers are looking for the reaction to roll early, smooth, and strong through the pins. Such is the case when your may be leaving ten pins, or just corner pins in general.
Often these "big" balls carry their pins lower than the ring finger depending on your individual speed. Again, lane conditions, style of delivery, and the ball, need to match up. Otherwise, you could be wasting some serious dollars.
In summary Louis, there are several things to consider. Check out storms website for the Nano. See what type of bowling style is yours. See your pro shop staffer and see what they recommend. The first consideration is always getting the correct ball for the lane condition, then match the bowlers style and speed to that. Finally after that is done you may be able to fine tune the surface of the ball to give you excellent results. Thank you for your question.
If push comes to shove, consider a simple 1 o'clock drilling with the pin to the right of your ring finger. However, instead of kicking the CG to the right which may make your ball too strong down lane, kick the CG to the left and let it come through and in line with your thumbhole. You need to redrill the ball in the future and make it stronger. Moving the CG to the right will provide a fresher track surface and will keep the previous thumbhole out of your track when redrilling. Always keep in mind, surface changes have the most affect on ball reaction. Often it will move a ball path as much as five boards left down lane. -Coach
Gary L. Oatis, USBC Silver
Las Vegas, NV.
www.TrueBowlerAdjustments.com
Purchase my book of bowling adjustments!
#### True Bowler Adjustments ####)))
"They know how to bowl, show them how to adjust!"-Coach