Can you change from overlap to beaded liner?

1. Drain your pool. This is also a great time to give your pool a thorough cleaning and inspection, including brushing walls and removing all the dirt, debris, and algae that builds upon the surface.

2. Remove the overlap liner. To remove the overlap liner, you will need a ladder, screwdriver, and a cutting tool. Start by removing the screws that hold the liner in place, then use the cutting tool to cut the liner around the edge of the pool.

3. Measure your pool. You will need the measurements of your pool in order to purchase a new beaded liner. Measure the length, width, and depth of your pool, as well as the height of the waterline.

4. Purchase a new beaded liner. When choosing a new beaded liner, you will need to decide what type of material you want (vinyl or fiberglass) as well as the colour and pattern. You will also need the liner to fit your pool dimensions.

5. Install the new beaded liner. To install the new beaded liner, you will need to:

- clean the surface around the pool edge to remove any dirt and debris

- align the liner with the edge of the pool

- attach the liner to the pool wall with the included hardware.

6. Fill your pool with water and enjoy!