Home Outdoor Sports FAQS Fishing Golf swimming Skiing and Skating Cycling Climbing Other Outdoor Sports Camping
-

Can too much muriatic acid hurt your sand filter for above ground pools?

Muriatic acid is commonly used to lower the pH level of swimming pool water. When used correctly, muriatic acid is safe for your pool filter. However, if too mu

-

Your saltwater system for your pool continually reads add salt you have added over 300 lbs and it still has a very low chlorine reading claims to need Any suggestions?

1.Test the salt level.Ensure the salt level is within the recommended range specified by the manufacturer of your saltwater system. If the salt level is too low

-

What is the chemistry for a salt water pool?

Salt water pools use a chlorine generator to convert salt into chlorine, which sanitizes the water. The ideal salt level for a salt water pool is between 2,000

-

How do you check the ppm of salt in a system pool?

There is no such thing as measuring ppm of salt in pool water. Salt or sodium chloride salt used to create chlorine pool water is measured in PPM as parts per m

-

How much stabilizer do you add in a 30000 liter saltwater pool when the test strip color shows too low?

Stabilizer is not typically added to saltwater pools. Saltwater pools use a chlorine generator to convert salt into chlorine, so there is no need to add additio

-

How can salt water be cleaned?

Desalination is the process of removing salt and other minerals from saltwater to produce fresh water. It is a vital technology for many countries that lack acc

-

Do salt water pools corrode more than chlorine pools?

No, salt water pools are actually less corrosive than chlorine pools. The only metal parts in a saltwater pool that come into contact with the water are the hea

-

Is chlorine based upon 99.5 percent Sodium Dichloro-S-Triazinetrione safe for pools with vinyl liners?

No, chlorine based upon 99.5 percent Sodium Dichloro-S-Triazinetrione is not safe for pools with vinyl liners. This type of chlorine can cause the vinyl liner t

-

How do you clear up green murky water in a above-ground intex pool if have drained it but get all of the out and will liquid algae solve problem or to shock as well?

To clear up green murky water in an above-ground Intex pool:1. Physical Cleaning:- Brush the pool walls, floor, and steps to remove any algae or debris.- Vacuum

-

How do i get dead algae off the bottom of my pool I used algaecide and then there were particles floating in water that could not scoop out with net now it is on bottom?

1. Vacuum the pool. This is the most effective way to remove dead algae from the bottom of the pool. Use a vacuum with a brush attachment to loosen the algae an

-

Can you use salt water in a intex pools?

Yes, you can use salt water in an Intex pool. Intex pools are made of durable materials that are resistant to the corrosive effects of salt water. However, ther

-

Can you convert clorine pool to salt?

Yes, it is possible to convert a clorine pool to a salt pool. The conversion process involves replacing the chlorine-based sanitation system with a salt chlorin

-

How much salt do you add to a 75000 liter pool maintain 3000ppm?

To maintain 3000 ppm of dissolved salt in a 75000 liter pool, you will need to add approximately 225 kg of salt.Formula:Amount of salt (kg) = Desired ppm * Pool

-

How much salt is added to a Salt chlorination system start it up?

When starting up a salt chlorination system, its important to follow the manufacturers instructions for the specific system. In general, the recommended salt le

-

What is the ideal salinity range for an in ground saltwater pool?

The ideal salinity range for an in-ground saltwater pool is between 2,000 and 3,200 parts per million (ppm). This range is high enough to prevent the growth of

-

What kind of pool would be better in Arizona saltwater or chlorine?

In Arizona, a saltwater pool would be a better choice compared to a chlorine pool due to several reasons:Comfort: Saltwater pools generally provide a more comfo

-

Can you erase permanent marker with saltwater?

Saltwater is not effective in removing permanent marker ink from most surfaces. Permanent markers are designed to be resistant to water, including saltwater.

-

How do you eliminate high chlorine demand and clear up cloudy water?

To eliminate high chlorine demand and clear up cloudy water, follow these steps:Identify the source of the high chlorine demand: This could be due to the presen

-

Can you use pool salt in your with out the water system?

Pool salts that are used for water softening should not be used in salt based water softeners. The same idea goes with water softener salt. Pool salts and water

-

How do you remove algae that is crusted on to an above ground pool?

To remove algae that is crusted on to an above ground pool, you will need:- A stiff pool brush- A chlorine-based pool shock treatment- A hose with a high-pressu

Total 205  piece sports  FirstPage PreviousPage NextPage LastPage CurrentPage:3/11  20 piece sports/Page Goto:1 2 3 4 5 6 7 8 9

Copyright © www.mycheapnfljerseys.com Outdoor sports All Rights Reserved