Increase pH in salt water pool?

1. Test the pH level of your pool water. The ideal pH level for a salt water pool is between 7.2 and 7.8. If the pH level is below 7.2, it is considered to be acidic and can cause corrosion of the pool equipment. If the pH level is above 7.8, it is considered to be basic and can cause scaling of the pool surfaces.

2. Add sodium carbonate (soda ash) to the pool water. Sodium carbonate is a natural substance that is used to increase the pH level of swimming pool water. The amount of sodium carbonate that you need to add will depend on the size of your pool and the current pH level of the water.

3. Run the pool filter for at least 24 hours after adding sodium carbonate. This will help to circulate the sodium carbonate throughout the pool water and ensure that the pH level is evenly distributed.

4. Test the pH level of the pool water again after 24 hours. If the pH level is still below 7.2, repeat steps 2 and 3.

5. Continue to test the pH level of the pool water on a regular basis and adjust the pH level as needed.

Tips for Maintaining the pH Level of a Salt Water Pool

* Keep the pool covered when it is not in use. This will help to prevent the pH level from dropping.

* Use a pool algaecide that is compatible with salt water pools. Some algaecides can cause the pH level to drop.

* Do not use muriatic acid to lower the pH level of a salt water pool. Muriatic acid can corrode the pool equipment.

By following these tips, you can help to maintain the ideal pH level in your salt water pool and keep it sparkling clean and inviting all season long.