How to Convert a chlorine pool magnesium and potassium chloride salt pools?

1. Test Your Pool Water:

Before making any changes, test your pool water to determine the current levels of chlorine, pH, alkalinity, and stabilizer (cyanuric acid). Record these values for reference.

2. Lower the Chlorine Level:

Adjust the chlorine level in your pool to 1-2 parts per million (ppm). This will help minimize the amount of chlorine that will react with the magnesium and potassium chloride.

3. Remove Stabilizer (Cyanuric Acid):

If your pool has a high stabilizer level (above 50 ppm), you may need to remove some of it. High levels of stabilizer can prevent the salt chlorinator from working effectively. You can lower the stabilizer level by partially draining and refilling your pool or using a chemical stabilizer reducer.

4. Adjust pH and Alkalinity:

Ensure the pH level of your pool is between 7.2 and 7.8, and the alkalinity is between 80 and 120 ppm. Proper pH and alkalinity levels are crucial for the proper functioning of the salt chlorinator.

5. Add Magnesium Chloride:

Add magnesium chloride to your pool according to the manufacturer's instructions. Typically, the recommended dosage is around 1-2 pounds of magnesium chloride per 10,000 gallons of pool water.

6. Add Potassium Chloride:

Next, add potassium chloride to your pool following the manufacturer's instructions. The recommended dosage is usually around 1 pound of potassium chloride per 10,000 gallons of pool water.

7. Turn Off Chlorine Generator:

If you have a chlorine generator or salt chlorinator, turn it off during the conversion process. You can resume using it once the conversion is complete.

8. Monitor Pool Chemistry:

Over the next few days, monitor your pool water chemistry regularly. Adjust the pH, alkalinity, and chlorine levels as needed to keep them within the recommended ranges.

9. Test Salt Level:

After a few days, test the salt level in your pool. The ideal salt level for a magnesium and potassium chloride salt pool is between 2,000 and 3,000 ppm. Adjust the salt level if necessary.

10. Turn On Salt Chlorinator:

Once the pool water chemistry is stable and the salt level is correct, you can turn on the salt chlorinator or chlorine generator.

11. Monitor and Maintain:

Continue to monitor your pool water chemistry regularly and make necessary adjustments to maintain proper levels. Regularly clean the salt cell or electrodes in your salt chlorinator to ensure efficient chlorine production.

12. Enjoy Your Salt Pool:

Once the conversion process is complete, you can enjoy a chlorine-free swimming experience in your magnesium and potassium chloride salt pool.

Note: It's recommended to consult with a pool professional or water chemistry expert to ensure a smooth and successful conversion process. They can provide personalized guidance and recommendations based on the specific characteristics of your pool and water conditions.