How do you remove the cover on a snapper LE 19 snow thrower I see any screws by handle there are three tabs front which would come out if could release end?

1. Locate the three tabs on the front of the cover. These tabs are located near the top of the cover, one on each side and one in the middle.

2. Press down on the tabs to release them. There is a small spring that holds each tab in place; use a screwdriver or pry tool for extra leverage to release the tab.

3. Lift the cover off of the snow thrower. Once the tabs are released, the cover can be easily removed.

4. If there are any additional screws holding the cover from the handle grip, use a screwdriver or wrench to remove them.

Reinstalling the Cover

To reinstall the cover, simply place it back on the snow thrower and press down on the tabs until you hear them snap into place.