Why does my Ithaca feather lite not extract the empty after firing?

- A dirty chamber can cause extraction problems as it increases friction and prevents the extractor from gripping the rim of the cartridge properly.

2. Weak Extractor Spring:

- Over time, the extractor spring can weaken, reducing its tension, and causing it to lose its grip on the cartridge as the slide cycles.

3. Damaged Extractor:

- Inspect the extractor for any damage or excessive wear that might prevent it from properly gripping the cartridge case.

4. Incorrect Ammunition:

- Ensure that you are using the correct ammunition designed for your Ithaca Feather Lite shotgun. If using reloads, check if they are within the specifications recommended by Ithaca.

5. Tight Chamber:

- If the chamber is too tight, it can make it difficult for the extractor to pull the spent casing out cleanly.

6. Obstruction in the Ejection Port:

- Check the ejection port for any obstructions like dirt, fouling, or a burr that may hinder the cartridge from ejecting smoothly.

If the problem persists, consider taking your shotgun to a qualified gunsmith who can accurately diagnose and rectify the issue.