An Important Task: Tying a Fly Fishing Knot

Tying a fly fishing knot is one of the most important things a fly fisherman must know how to do. Since the line is actually composed of different types of lines in addition to the fly at the end of it, tying a solid fly fishing line knot is extremely important so that none of the parts come loose during the fishing process, causing the fisherman to have to tell about the 'one that got away.'

Tying a Good Knot

There are some general tips that help a fly fisherman to tie good fly fishing knots that will not come loose in inopportune times. One tip is to moisten the knot with water or saliva before pulling it tight, which helps it to hold more tightly once it is pulled. Another tip is to tighten the knot with a steady pull rather than jerking it tight, since it will cause it to have a more uniform snugness throughout the knot, so that a fish tugging at it will not all of a sudden draw a part of the knot tight and cause the line to snap.

In addition, it is always important to check the fishing line around each knot to make sure there is not an abrasion or any other feature that might show the fly fisherman that he may need to redo the fly fishing knot in that particular area. If the line or the knot looks worn or frayed then he is wise to go ahead and replace the line and tie another fly fishing knot in that section so that he will not lose any line or flies, not to mention a great catch. When the fly fishing knots are formed, they should also be trimmed so that there are not any stray pieces of line hanging out to the side. The fly fisherman has to be careful about this however so that he does not cut too close and ruin the fly fishing knot he just produced.

There are a series of different fly fishing knots that are used when getting a fly fishing line ready for the water. Starting closest to the reel, an Arbor knot is usually used to connect the backing to the spool of the reel. After that, an Albright fly fishing knot is usually used to tie the fly line to the backing, which is a little tricky because the lines are usually made of different materials. A Nail knot is next, which connects the leader to the fly line, which is important because this is what turns the fly over at casting. Next is the Double Surgeon's fly fishing knot which is used to connect the tippet to the leader. Finally, the Improved Clinch knot is usually used to connect the fly to the tippet, thus completing the fly fishing line.