How do i clean a rusty bike chain?

- A bucket

- Warm water

- Dish soap

- A toothbrush or stiff brush

- A rag

- A chain degreaser (optional)

- A chain lubricant

Instructions:

1. Fill the bucket with warm water and dish soap.

2. Remove the chain from the bike.

3. Soak the chain in the bucket for 15 minutes.

4. Use the toothbrush or stiff brush to scrub the chain, paying special attention to the rusty areas.

5. Rinse the chain with clean water.

6. Dry the chain with a rag.

7. Apply a chain degreaser (optional).

8. Apply a chain lubricant.

9. Replace the chain on the bike.

Tips:

- To prevent rust from forming in the future, lubricate the chain regularly.

- If the chain is very rusty, you may need to soak it in a solution of vinegar and water for 30 minutes before scrubbing it.

- Be careful not to use too much chain degreaser, as this can damage the chain.

- When applying chain lubricant, be sure to follow the manufacturer's instructions.