Bicycle Frame Size, Bicycle Framing
Bicycles can be measured in several ways but the most common and latest means of measurement is the top tube length measurement. So how do you know which bicycle size is the most appropriate for you? Read the article below to know more about bicycle frame sizes.
In the early days, bicycle frame sizes were measured depending on the seat tube length which was generally shown in centimeters for road bikes and in inches for mountain cycles. But now with the change of times and improvement of technology and launch of compact sizing, road bike frame is measured depending on top tube length. So, this is one of the key factors for determining the road bike frame size because the length of the top tube will determine the overall height of the cycle. In case, you wish to alter the size of the cycle then you have to reduce the length of the top tube without disturbing the entire geometry of the cycle.
Bicycle frame size Moving on, it's important that you always have a cycle which is proportional to your overall height. Riding a road bike which is too tall in length can be dangerous, especially in emergency situations since you might be not be able to land on the ground with great ease and speed. On the contrary, riding a cycle which is too slow is also bad since you have the chances of staining your back or injuring your knee muscles since the handlebar might hurt your knees. So, when you decide to buy a bicycle, remember to get one which is proportional to your height and body weight, since you should be able to balance your bicycle as well, while riding it.
Bicycle framing systems Nowadays, there are a wide variety of sizing systems which are available in the market and these systems measure the body weight and height of the cyclist and determine the exact size of the bicycle frame required by the cyclist. These systems make it absolutely easy for the rider to determine the exact bicycle frame for him and prevent any chances of injury or discomfort while riding. If you are not a bicycle racer, it is better to opt for medium-length cycles of light-weight which are easy to maintain and carry around instead of settling for heavier and taller bicycles like the ones usually used by the racers. Extra gears and other accessories like headgears and twisted handlebars should also be avoided by recreational cyclists in order to avoid accidents and injuries.
So, always try to check any of the sizing systems and be doubly sure of your height and weight before settling for a high-end road bike.
Road Bike Frames, Size, Symmetry and Frame Materials
The thrill of a BMX