How do you assemble cannondale f300 mountain bike?

1. Unpacking and Identification:

- Unpack the bike from its packaging and remove the protective materials.

- Identify all the components and parts included with the bike.

2. Setting up the Headtube:

- Attach the front fork to the head tube of the bike.

- Fit the headset cups into the head tube and install the star nut.

- Install the fork bearings onto the headset cups and lubricate them.

- Insert the headset spacer and press the top cap into place.

- Install the stem onto the steerer tube and secure it with the stem cap and bolt.

3. Installing the Handlebars:

- Place the handlebars onto the stem and align the handlebars straight.

- Attach the brake lever assemblies and grips onto the handlebars.

- Insert the shift lever assembly and secure it with the provided clamps.

- Route the brake cables and shifter cables along the handlebars.

4. Installing the Front Wheel:

- Place the front wheel into the fork dropouts, aligning the quick-release skewer holes.

- Secure the front wheel with the quick-release skewer.

5. Installing the Rear Wheel:

- Slide the rear wheel into the rear wheel dropout slots on the bike frame.

- Attach the derailleur hanger to the frame and secure it with the provided bolts.

- Connect the chain around the rear cassette and onto the chainring.

- Check the chain tension and make necessary adjustments using the rear derailleur.

6. Installing the Pedals:

- Locate the left (L) and right (R) pedals.

- Attach the left pedal to the left crank arm by turning it counterclockwise until it is snug.

- Attach the right pedal to the right crank arm by turning it clockwise until it is snug.

7. Brake Adjustment:

- Ensure the brake pads are aligned properly with the brake rotors and are not rubbing.

- Adjust the brake caliper position if necessary.

8. Derailleur Adjustment:

- Shift through all gears to ensure smooth and precise shifting.

- Make adjustments to the front and rear derailleurs if necessary using the adjustment barrels or limit screws.

9. Tighten All Bolts:

- Double-check all bolts, fastenings, and clamps to ensure they are tight and secure.

10. Test Ride:

- Inflate the tires to the recommended pressure.

- Take the bike for a test ride to ensure everything is working properly and the bike is comfortable to ride.

11. Post-Assembly Maintenance:

- After your first ride, inspect all the bolts, cables, and components to ensure they are still secure.

- Consider adding a light coating of grease or lubricant to the moving parts of your bike.

- Refer to the bike manual for specific maintenance instructions and guidelines.

Remember that if you are unsure or uncomfortable with any of these steps, it's best to seek professional assistance from a qualified bike mechanic or consult the bike's assembly instructions manual provided by Cannondale.