How do you attached the Bell bike lock to mounting bracket?

You will need a hammer, a drill, a screwdriver, and a wrench

Step 2: Find the mounting bracket.

The mounting bracket is usually included with the Bell bike lock. It is a small, metal bracket with two holes for screws.

Step 3: Determine where you want to mount the bracket.

The best place to mount the bracket is on the downtube of your bike frame, behind the seat tube. This will position the lock in a convenient location for you to access it.

Step 4: Mark the holes for the screws.

Once you have determined where you want to mount the bracket, use a pencil to mark the holes for the screws.

Step 5: Drill the holes.

Use a drill to drill the holes for the screws. Be careful not to drill too deeply.

Step 6: Insert the screws.

Use a screwdriver to insert the screws into the holes. Tighten the screws until they are snug.

Step 7: Attach the Bell bike lock.

Insert the shackle of the Bell bike lock into the bracket. Turn the key to lock the shackle in place. Remove the key and store it in a safe place.

Your Bell bike lock is now attached to the mounting bracket.